13 in Laminator, Hot and Cold Laminating Machine, Thermal Laminator for A3 A4 A5 A6, 50PCS Laminating Sheets, Paper Trimmer, Corner Rounder

SPECIFICATION
-Item Dimensions: 445*145*88mm
-Pouches Thickness: 3mil to 5mil (80-125mic)
-Speed: 355mm/min
-Max Width: 330mm/A3
-Preheat time: 1-2mins
-Temperature Range: 115-145℃
-Power: 400W
-Noise: <55db
PACKAGE:
1* Laminator
50* Laminating Sheets
1* Paper Cutter
1* Corner Rounder
NOTE:
Do not insert from the opening side of the protective film.
Do not use a protective film that is torn.
Do not use a protective film that does not follow the standard.
Do not use a rolled-up protective film.
Do not connect the front and back films.
Do not use a film that was cut or has changed shape.
Do not use materials longer than 65mm.
Choose the right thickness to better match the laminating machine; 8 mil is a commonly used thickness that offers a moderate level of rigidity.
The thicker the pouches, the stiffer the laminated result

Issues and Solutions:
Non-adhering, white patches
– **Causes:**
A. Insufficient preheating, temperature not right.
B. Incorrect thickness setting.
– **Solutions:**
A. Wait for the laminator to fully heat up (green light) before use.
B. Select a higher setting, and laminate after the temperature is ready.
Machine not working, not heating
– **Causes:**
A. Power supply issue.
B. Switch not set to “on” or “hot” mode.
– **Solutions:**
Ensure the switch is set to “on”/“hot”.
Bubbles, warping, and curled edges
– **Causes:**
A. Incorrect thickness setting.
B. Laminating unevenly.
C. Materials not placed flat.
– **Solutions:**
A. Select a lower setting, and laminate after the temperature is ready
B. Check for jams and clean the rollers.
Lamination is stuck
– **Solutions:**
– Turn off the machine and press the ABS button to release the film, then clean the rollers.
Laminating machine overheating
– **Causes:**
A. New machine often has this issue.
It does not affect usage; after using it a few more times, it will work normally.”
B. Power supply voltage is incorrect (burning smell).
– **Solutions:**
– Ensure the laminator is connected to the appropriate power supply
This laminator has a dual roll system for bubble- and wrinkle-free lamination, heats up in 1-2 minutes with stable temperature within the range of 115-145℃, and operates at a speed of 355mm per minute
The laminating machine offers both cold and thermal lamination modes. The hot mode is for regular documents, while the cold mode is designed for heat-sensitive paper documents, prints or photographs
The laminating device fits sheet sizes from A3 down to A7, and works with 3mil to 5mil (80-125mic) pouches, making it suitable for paintings, menus, business letters, certificates, photos, and labels
To prevent paper jams, the laminator features an innovative ABS paper release lever to remove stuck pouches. Simply turn off the machine, hold the ABS lever, and pull out the jammed pouch
50 laminating sheets, a paper cutter and corner rounder are included for extended use, ideal for offices, schools, homes, and businesses to protect and enhance documents, and creative projects through lamination