RATTMMOTOR STL-63 110V Pneumatic Punch Press Machine with Controller and Double Button, Small Desktop Punching Press Hand Machine 0.5-0.8Mpa Operation Pressure 200KG

Product description

STL-63 110V Pneumatic Punch Press Machine with Controller and Double Button

Product features:

Compressed air as a power source, high efficiency and easy to operate, can reduce the labour force, can be applied to manual operation, automated assembly line integration operation;Simple structure, easy to operate, inexpensive, superior performance, no hydraulic system and electric standby noise, can save power consumption to reduce production costs, has a very high cost-effective;The output force is easy to adjust, only need to adjust the pneumatic pressure can be adjusted to the required pressure, high yield. Equipped with anti-rotation guide bar, guide plate, high precision, can adapt to high-speed precision punching;According to different products or moulds, it can adjust the height, speed, stroke, pressure and stamping time;Optional two-hand control buttons or foot switches can be used, protection devices, heating moulds, temperature control and pressure sensors can be added, and the manipulation device and pre-control device meet the safety standards to ensure the personal safety of the operators.Adopting microcomputer control system, manual, semi-automatic and full-automatic operation can be selected, and another control device can be added.Adopting high-density alloy material, high strength, long life, no deformation, adjustable cylinder stroke.

Structure of Machine

Adjusting wheel : Adjust the body height within the effective travelElectromagnetic valve: Can work one hundred million timesCylinder: Cylinder diameter determines pressure magnitudeAir source processor: Select the appropriate press according to the cylinderWorkbench: Choose according to the working volumeT-slots: According to the T-nut of M12Dual button: Start the work by pressing the double buttonwith both hands at the same time, it is safer and more secure to useFoot switch: With the foot switch, press at the same time for high safetyMold link heavy head: The maximum diameter of the die handle must not exceed the maximum diameter of the punchIntelligent controller: Optional fully automatic, semi-automatic, manual, counting operation modeAdjustable travel nut: Adjust the body height within the effective travel

Model 63 Parameters

Working table area: 135*150mmClosed height: 200mmMould shank hole: diameter 16mmWeight: 16KGCylinder specification: 63×75-50Inlet pipe specification: 8*5MMControl Methods: Pneumatic/electronic controlTheoretical pressure: 200KG / 440.92 Ib

Applications

Model: STL 63×75-50Cylinder diameter: 63mmCylinder stroke: 75mmAdjustable range of cylinder stroke: 50mmIf the maximum cylinder stroke is 75mm, reduce 50mm, the minimum stroke is 25mm, shorten the stroke can reduce the air consumptionAir pump: with more than 70L air pumpUse of industry: suitable for small accessories, plastic parts, plaster moulding, copper rivets, pressing and so on

ntelligent controller

Controller time can be adjusted arbitrarily (0.0~99 seconds)

Function mode: full auto/semi-auto/debug stop/count

Operation mode: manual/foot pedal/double button

Section number: Only 2 segments need to be set for a single cylinderSemi-automatic control: Depress the foot switch to stamp a round trip at the preset timeFully automatic: Automatic operation according to the set stamping time, the emergency switch can be turned offThe editor: Long press for 3 seconds to adjust the first gear,press once to adjust the second gearAdjust the time: When editing the number of segments, you can adjust the time for each functionFeature selection: Choose manual, semi-automatic, full-automatic debugging, press once to switch to the next oneCounter reset: Long press for 3 seconds to clear the numbersTurn on/off the scram: Hold for 3 seconds,turn off the machineDebugging: Press the foot switch to start, release the pedal to returnPower light: Light on for working stateCounter: Display the amount of work

Adjust height Please adjust in the order of 1, 2, 3

Firstly, loosen the two screws at the top and bottomThen tighten the middle screw, so that the control panel is slightly separated from the column, be careful not to exert too much forceRotate the handwheel to adjust the body heightNote: After adjusting the required height, first loosen the middle tightening screw, and then tighten the two screws above and below

✅【Model Description:】Model: STL63; Cylinder Diameter: 63mm; Cylinder Stroke: 75mm; Cylinder Stroke Adjustable Range: 50mm: If the maximum cylinder stroke is 75mm, reduce by 50mm, the minimum stroke is 25mm. shortening the stroke can reduce the consumption of air supply.
✅【Model 63 Parameters】Worktable area: 135*150mm; Closed height: 200mm; Mould shank hole: diameter 16mm; Weight: 16KG; Cylinder specification: 63×75-50; Inlet pipe specification: 8*5MM; Theoretical pressure: gas control/electric control.
✅【Use industry】Can be equipped with more than 70L air pump, suitable for small accessories, plastic parts, plaster moulding, copper rivets, press-fit and so on.
✅【Controller + double buttons】Equipped with controller function: full-automatic, semi-automatic, manual, counting; cylinder down stay time 99.9 seconds or less adjustable, cylinder return stay time 99.9 or less adjustable, etc. Functions, must be both hands at the same time to press the double button to start the work, high security.
✅【Product features】Compressed air as power source, high efficiency and easy to operate, can reduce labour, can be applied to manual operation, automated assembly line integration operation; according to different products or moulds, adjust the height, speed, stroke, pressure size and stamping time.